...220 in a 200 back) correctly (i've even blown the a roll to make sure it was done correctly)... However, when I cock the shutter and release it - the film will not advance. In fact, the red indicator ...
Basic Guide for 645 Pro-TL? Hello. I recently bought a 645 Pro-TL but need a basic guide of operating this camera. I have the Instruction Manual but nothing which explains some of the basics which I ...
Question about 645 Pro 80mm F2.8 N/L Lens
...pro camera I can't remove the old film spool from the camera ? JoAnn Squeeze the two handles on either side of the "120" or "220" label on the film holder to pull it out, then the spool is easily ...
Question about RB67 Pro SD Medium Format Camera
Pro-S film back doesn't advance film properly. I have a film advance problem with a 120 Pro-S film back for the Mamiya RB67 ProS. I cannot advance film unless the multiple exposure lever is engaged ...
I have a RB67 pro SD and just bought a #1 extension tube for it but the lens doesn't want to mount deep enough? What am I doing wrong? I can't close the lock ring. You might have an earlier rb pro S (
Question about 645 Pro TL Medium Format Camera
I need a repair manual for the Maniya 645 Pro? Is there a repair manual for the Maniya 645 Pro? Not just a parts manual. Thanks This is copyright material and has never been made publicly available, ...
Question about 645 Pro TL Medium Format Camera
can the pro tl be converted to a digital back? hasselblad makes a digital back--approximately $20,000 USD (yes, that is 20 THOUSAND) and then you need the adaptor (approx. another $1000-$1500 USD). If
on my mamiya rb67 pro sd body, the cocking lever gets stuck when I wind it fast, its OK when I let it come back slowly. Some of the gears are probably loose. I would suggest you take it to a ...
Just purchased a Mamiya 645 pro body with a back and I'm trying to make sure it works. Currently, I can not get the shutter to fire and I have checked: battery shutter lock dark slide correct ...
Question about RB67 Pro SD Medium Format Camera
Film-advance warning won't go away on a RB67 Pro SD 120 film back? Hello there. I've loaded a roll of 120 film correctly into the Pro SD back, aligned the arrow on the film with the arrow ...
Usually answered in minutes!
20 Questions
24 Questions
12 Questions
2 Questions
13 Questions