...Ribbon Drive, Shuttle Drive and Paper Feed Drive Logic on CMX. a) Redownload Flash software. b) Replace Flash Memory SIMM. c) Check / Replace Hammer Bank Logic Cable Assy (152421-901). d) Check / ...
Question about Compaq Line Printer LG05 500 LPM Matrix
ribbon drag sensor if such exists. this is printronix 5010, i wait ur advise thanks steve Dolphin intl. there are few things.. may be your ribbon hub damage... your ribbon motor not working properly..
ribbon stal 34 RIBBON STALL TIMEOUT Yes In the CT emulation with a coax interface, the ribbon has not moved for 10 minutes after CLEAR was pressed to clear the ribbon drive fault. Reload the ribbon.
...RIBBON STALL" what My Printronix P5005B says "RIBBON STALL" what shall I do? Remove the ribbon and check for play when turning the plastic ribbon hub by hand. If it is loose try tightening ...
PRINTONIX P7210 RIBBON STALL Logic card having problem
PRINTER PRINTONIX P7210 RIBBON STALL Logic card having problem
on my printronix p7005 getting massage ribbon stall logic card having problem
5210 service manual ribbon stall A ribbon stall can be caused by the platen handle being too tight, but if that is not the issue the CMX usually is the bad part. MRP provides IT Parts Product Supplies
5210 manual what is ribbon stall Printer is not detecting that the ribbon is moving usually caused by a broken hub. MRP provides IT Parts Product Supplies and Services
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions