Questions & Answers for: printing bad side paper hl

...paper got a new laser brother 2140 installed everything but it prints only blank papers Make sure you are letting it warm up long enough. Brother HL-2140 Support Turn printer off. Hold down big blue ...

...side of paper I bought a new HL-2140, got it up and running, printed three test pages and a separate text document and all four pages had similar small (about 1/8") horizontal ink notches on the left ...

can we use tracing pager for print in brother HL-2140 printer model consult your manual for maximum and minimum thickness of paper ... i suspect tracing paper will jam the printer

side from the paper tray and toner cartridge door. You should see a little black roller rod along with some white wheels. The noise may be coming from the contact between the wheels/rollers which pull

...paper there. What could be the reason and how could I solve it? Thanks, Ilya Try to unplug the power from the print, wait 1 minute then plug back in. This may remove the error. Reset printer by ...

HL 2140 does not print even with new toner Hi, This is a common problem to your brother printer model 2140. You need to turn off your printer and take out the toner. Look for the side and you will see

...HL-2140 - can I print with 8 1/2 X 14 paper? I can't get it to fit in the tray. Need to print on longer paper. Hello sir; Yes, you can,don't need to put in the tray, only place you can use is by-pass ...

paper since I bought my HL 2140 new, but the print is starting to look a little faded. Someone told me I might need to take the toner cartridge out and shake it? Is that true? How do I do that without

...for double sided printing with this model is to print odd numbered pages, then manually replace the paper into the tray and print the even numbered pages in a second set. Regards, Dan IT ...

...Printing on thick paper, labels and envelopes 2 When the back output tray is pulled down, the printer has a straight paper path from the manual feed slot through to the back of the printer. Use this ...