Questions & Answers for: printer rollers catching paper

paper My printer won't catch the paper to feed it threw and if it does catch the print isnt strait or gets jamed in the printer. Does this sound fixable? yes, clean your paper feed roller with rubbing

...rollers that grabs the paper. It's usually a flat piece of plastic with some kind of stuff on it that grips the paper. It's actually on the out bound side of the printer. You can re-glue the pad by ...

paper isn't catching on the roller - terrible sounds The paper isn' catching on the roller and it is making terrible sounds. make sure the paper is not wet and not damp. possible buy a new paper

...on the left side as you face the printer. This is possibly down to the upper fuser roller wearing and catching the paper when it goes through the fuser. The upper roller surface breaks up and ...

...rollers with alcohol or put a new roller in your printer. If you have a printer with a tray, make sure it is set correctly for the paper you have installed. It will try to grab the paper a number of ...

rollers of the printer this problem is caused by dirty rollers.... Follow these steps to clean the paper rollers. Press the Power button ( ) to turn off the product. Disconnect the power cord from the

...rollers rolling but the paper doesn't go I did try to see if there was a blockage but none. There is no paper jam signal. So what can I do? Thank You, Sheri try to put the paper correctly. It seems ...

...rollers get dirty or worn-out, the printer fails to pick the paper, which results in paper jam etc.. So, remove the paper tray and toner cartridge and locate the paper pick up roller in the middle. ...

...paper in the tray does not feed. It lifts but doesn't catch. The printer's pickup roller needs to be cleaned or if its worned needs to be replaced. The pickup roller is the little blue rubber ...

...rollers so it could print. There is not any paper jammed up in the printer either. Gene Kroll Help would be appreciated! >> it would not catch the paper on the rollers so it could print. Try ...