Questions & Answers for: printer printing shades red

...printer forever with no issues. Recently, the color printing started to change .. as if the color cartridge was near empty. After only a few more print jobs and copies, it started printing in only ...

...printer to print Red print. It always comes out this brownish print even though I installed a new color cartridge. How can I get good colors again? I had the same problem until i used every cleaning ...

...hi i am having problems printing photos with canon printer, photos are printing in a red shade, can you help? Ta Gail If your not low on ink try shaking the cartridges right before you use

...shades of red. tried to clean and prime and still only prints red did you cleaned golden contacts on print head and cartridges with alcohol? if no, try it, other option is, that new cartridge is bad, ...

to get yellows, greens, reds and orange shades.) First try running the printer utility to clean your ink jets, then run a test print. If this does not work then simply replace the yellow ink cartridge

printer prints colours in different colours when i print out a letter head instead of it printing in red it does it in yellow cheers ash Either you are out of red ink or the print head is getting ...

...printer was missing red colour. Every red colour was placed by yellow. Yellow is one of the colours used to produce a shade of red. I don't know how but ther must be a way to print a test page to see ...

...shades of green usually indicate that the red is not printing properly. Self cleaning should take care of it red or yellow color nozzles are smuggled.you have to try to clean the printhead 1 or 2 ...

...printer--magenta ink comes out pink not red (right out of sealed package!) magenta is just a fancy name for pink.... its usually a darker shade of pink not overly dark but not a bright pink that most ...

...printer only prints the blue shades. The yellow and red colors do not seem to work. I just replaced the color cartridge. Maybe your printer need cleaning, do this from Properties > Maintenance, ...