Questions & Answers for: print rx data fax

Question about L120 Fax Laser Printer

Memory full

Print or delete documents in memory and ask the other party to send the fax again. Refer to the following to delete transmission jobs reserved in memory. 05SH01024_EN_01 How to Cancel Reserved Jobs 1.

Question about FAXPHONE L80 Laser

1 Answer

Canon FaxPhone L80

...Data Registration, and then Set. Use the up/down arrows to select "report settings", then Set again. Using the arrows and Set change the values or TX REPORT and RX REPORT to "YES". This will pring a ...

Question about FAXPHONE L80 Laser

1 Answer

CKECK PAPER & RECEIVED IN MEMORY

...PRINT FROM MEMORY-KEEPS SAYING CHECK PAPER-REC'D IN MEMORY--THEN PRINTS OUT DUPS OF THE SAME THING-I HAVE TRIED UNPLUGGING THE MACHINE--I HAVE CHANGED THE TONER CART.-I HAVE EVEN CHANGED RX TO MEMORY ...

Question about WorkCentre M15i Laser Printer

1 Answer

After upgrate firmware problem in receiving fax

...print them out. It shows secure fax on the display but when i go to the secure fax option on the menu i cannot disable it (second line is blank), it just show secure fax on the display and no options ...

Question about PIXMA MX310 All-In-One Printer

1 Answer

I want to have the MX310 to answer on 4 rings

...TX Report and RX Report print upon transmission or reception offaxes depending upon the settings made in [FAX SETTINGS->TXSETTINGS->TX REPORT] and [FAX SETTINGS->RX SETTINGS->RXREPORT], ...

Question about PIXMA MX310 All-In-One Printer

2 Answers

How can i get a fax from memory.

...print the first page of the document under the transmission report to remind you of the contents of the document. RX (Reception) REPORTPrints after reception of a document. You can enable or disable ...

Question about PIXMA MX310 All-In-One Printer

1 Answer

How do you turn off the in use/memory light?

Question about MX310 Office All-In-One Printer

5 Answers

I am still unable to

PRINT RX, make sure this is ON, I bet this is your problem. If this is off it wont print the faxes. To print what you have in memory, which you should do first, hit FAX, then MENU, go through the list

Question about PIXMA MP830 All-In-One InkJet Printer

1 Answer

Cannot send or receive a fax.

...malfunctioned. ##237 RX The decoder control unit has malfunctioned. ##238 RX The print control unit has malfunctioned. ##261 TX / RX A system error has occurred between the modem and the system ...

Question about PIXMA MP830 All-In-One InkJet Printer

1 Answer

Cannot send or receive a fax. I can hear a click

...##237 RX The decoder control unit has malfunctioned. ##238 RX The print control unit has malfunctioned. ##261 TX / RX A system error has occurred between the modem and the system control board. ...