Print or delete documents in memory and ask the other party to send the fax again. Refer to the following to delete transmission jobs reserved in memory. 05SH01024_EN_01 How to Cancel Reserved Jobs 1.
...Data Registration, and then Set. Use the up/down arrows to select "report settings", then Set again. Using the arrows and Set change the values or TX REPORT and RX REPORT to "YES". This will pring a ...
...PRINT FROM MEMORY-KEEPS SAYING CHECK PAPER-REC'D IN MEMORY--THEN PRINTS OUT DUPS OF THE SAME THING-I HAVE TRIED UNPLUGGING THE MACHINE--I HAVE CHANGED THE TONER CART.-I HAVE EVEN CHANGED RX TO MEMORY ...
Question about PIXMA MX310 All-In-One Printer
...TX Report and RX Report print upon transmission or reception offaxes depending upon the settings made in [FAX SETTINGS->TXSETTINGS->TX REPORT] and [FAX SETTINGS->RX SETTINGS->RXREPORT], ...
...print the first page of the document under the transmission report to remind you of the contents of the document. RX (Reception) REPORTPrints after reception of a document. You can enable or disable ...
...print the first page of the document under the transmission report to remind you of the contents of the document. RX (Reception) REPORTPrints after reception of a document. You can enable or disable ...
PRINT RX, make sure this is ON, I bet this is your problem. If this is off it wont print the faxes. To print what you have in memory, which you should do first, hit FAX, then MENU, go through the list
print to it from Outlook -your Outlook (being American, -Microsoft) will likely default to "letter" whereas if you live in UK you will have A4 paper installed. OOPS !....Canon can't come from this and
...malfunctioned. ##237 RX The decoder control unit has malfunctioned. ##238 RX The print control unit has malfunctioned. ##261 TX / RX A system error has occurred between the modem and the system ...
Question about PIXMA MP830 All-In-One InkJet Printer
...##237 RX The decoder control unit has malfunctioned. ##238 RX The print control unit has malfunctioned. ##261 TX / RX A system error has occurred between the modem and the system control board. ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions