Questions & Answers for: prime intex sand filter

How to prime my Pool? how do I prime my pool? Prime is the term we use to state that the air has been mostly purged from the pump and the pump is moving water. When you have lost the prime, your pump ...

...prime. On the filter, there is a air relief valve. Depending on the filter, it will pinch and twist, or there is a knob to uncrew. Doing that as the motor is running allows tbhe air that has built up ...

lost my prime in my pump, i have tried numerouse time fill the basket area with water turn on pool pump nothing, any more suggestions. if this is a flooded suction and when it turns on it keeps ...

...prime I have a new Hayward VL series sand filter hooked up to an above ground intex soft sided pool. The pump/filter is lower than the suction hose connected to the pool. Once the pump is primed it ...

...then they should dissapate in -60 seconds , if bubbles continue, you have a suction side leak in maybe a filter lid or hose connection this will make the filter loose its prime after every off ...

...sand filter and the spec's on the pump 1.25 hp with a head of 19 mtres and able to pump 400 lt/min. I was told this was more than capable of handling this volume etc. do you have any advise as to why ...

prime a sand filter pump It depends on the pump but most pumps have a filter bowl with a screw on cover - you need to fill this with water and start the pump. if the pipework connected to the pump and

...prime a sand filter pump use a garden hose connected to house supply to fill the housing and pump head , after that Pump should be able to take over and use water pulled from skimmer , if all your ...

how can i get my intex sand pump to vacuum it loses prime when i connect it make sure hose has water in it before you connect

...the motor running and you are just not getting anything out of it or low pressure you will need to prime it. Pour water into it on the output side and that should get it