primed starts then turns off won't run 86 300zx starts,Runs if primed and once primed fuel has run out turn off,seem yo me that my injectors are not working. I traced the wiring from injectors to comp
starts ,runs & turns off won't run with supplying fuel 86 300zx starts,Runs if primed and once primed fuel has run out turn off,seem yo me that my injectors are not working. I traced the wiring ...
...Fuel pump prime because you hear the pump. IF pump is weak, then your Fuel distributor doesn't have correct pressure to spray fuel when injectors open. Do your sparks plug wet after trying several ...
fuel injectors don't prime, starter cranks, doesn't fire if the injectors are not priming your fuel pump must not be working or your fuel filter is blocked check these 2 things and get back to me
...two yellow wires jumped did not seam to prime the system.? Your fuel injector rails should have a pressure release valve somewhere. Pressure needs to be released. Watch out for flying fuel
fuel. It turns over normally, but won't fire. Follow air filter hose to injector prime injector see if it starts if you keep priming and it wont stay running replace fuel filter if that don't work you
Question about Neuson DPU 6555He Electric Start Reversible Plate Compactor 22" Wide Base Plate with 12.9HP Diesel Hatz Engine
prime fuel prime the diesel when you have changed the fuel filter 2005 rodeo turbo diesel????? ... fuel filter assembly is fitted with a prime pump. you can use it to prime the fuel. another way is to
...fuel wouldnt prime,fitted another lift pump still wont prime i have fuel at the pump but not primeing? filling the filters before installing will make priming go more quickly. once the pump is primed ...
Question about 1989 Land Cruiser
...how to prime them? No, The injectors do not need primed. If having trouble getting fuel to engine, Check and be sure fuel pump is working properly. God-Bless! If not check the fuses and relay
...prime fuel injectors All that is needed here is to turn the ignition switch on and off several times, Then go ahead and try starting the engine. If no start, repeat the on off procedure again. This ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions