Question about Presario R3000 Notebook
...happens press and hold power button until you hear response(shut down)press power as usual to boot.if it doesnt work first time try a few times more remember to keep power button pressed to shut
...press the power button. Of course nothing will happen. unplug power cord again. plug power supply back into the board. plug power cord backup and press power switch. If nothing happens unplug power ...
...Power Button (Result: Nothing happens.) 2. Pressing the Power Button and the Home Button (Result: Nothing happens.) 3. Connect the iPhone to my Mac (Result: Nothing happens.) 4. Connecting the iPhone ...
...press the power button on my hp DC5100 deskop nothing happens, the power led doesn't come on. I have had the top of the desktop made sure that all the wires were in securely and they were. But still ...
...press the power button once and release both of them. it will perform the built in self test on the lcd. if nothing happens, turn off computer. press anf hold Fn and while holding it press power ...
Question about Lumix DMC-FZ3 Digital Camera
...press > button nothing happens? 1. Power off 2. Remove the battery. 3. Put the battery to its place 4. Power on 5. If nothing happens 6. Replace the battery with charged one 7. Power on again It ...
...Press and hold the power button for 10 seconds. If nothing happens go to the next step. 2. Remove the battery of your laptop, then plug the power cord of your laptop directly, then press and hold the ...
...power on self test v4.2 displays I press the Up arrow button then press the Enter button 3.) Nothing happens 4.) Power down the machine, wait 10 seconds 5.) Power up the machine wait for the Xerox ...
press the power button, nothing happens. At first, I had to press it ******* the corner to get it to work. Now, no matter where or how hard I press it, nothing happens. Any suggestions? How To Replace
Question about iPhone 5
...happens. What is yo press the power button but nothing happens. what can be done to try to get it on Make sure the switch on the back of your power supply is set correctly and check for blown
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions