Questions & Answers for: Sanyo no power to my tv

Ad

Question about HT32744 32" TV

1 Answer

TV GOES DEAD UNTIL POWER PLUG IS PULLED OUT AND REINSTALLED. AFTER THREE MORE TRIES TV GOES DEAD AGAIN hi there, there is a power supply section problem, do some test, automatic shutdown means a power

Ad

...tv. power button doesn't show power is on but i can hear a BLINK noise when turning tv on. red light at power button doesn't illuminate anymore - please help. i took back cover off tv - fuse inside ...

Ad

Question about DP19657A 19 in. LCD TV

1 Answer

...tv power supply board have problems and the cause it not giving the tv the wright voltages to power up the tv and make it work.That the board,where the power a/c cord plug into it.Tries websites like ...

Question about DP32649 31.5 in. TV

1 Answer

...tv have problems with it power supply board.The power supply board it not giving the tv,the wright voltages to the tv anymore.That the board,where the power a/c cord plug into it.Tries websites like ...

Question about DP50747 50 in. Plasma TV

1 Answer

...tv power LED light on the tv just blinks.Tries tv unplug,replug the tv back like about an hour,that the resetting tv back to the factory setting.The tv should working again now.If not the tv power ...

Question about DP32746 32 in. LCD Television

1 Answer

...tv power LED light indication blinking too?Check the power source?Tries tv unplug,replug it back about an hour later for the tv do a resetting itself back to the factory setting,tv should be working ...

...tv power supply board that the board where the power a/c cord plug into it.The tv power supply board it is dying and the causes,it is not holding and sustanstance tv power voltages anymore.Tries ...

Question about DP50747 50 in. Plasma TV

1 Answer

...tv power source to the tv itself.Replaced the tv sub power supply board where the a/c power cord plug into it.Try website like Ebay.com to buy a whole new refurbish sub power supply board for the ...

Question about DP50747 50 in. Plasma TV

1 Answer

...TV on other power outlets.  Ensure required voltage is there on the power outlet.   Even then, if you notice that the TV does not work, it might be attended to by a skilled and ...

Question about DP46841 46 LCD TV 1920x1080, 60 Hz, HDTV

1 Answer

...tv won't power up by using the remote control or the power button on the tv Likely a power board issue. Check that capacitors are OK in the power board, and if blown then replace with exact parts. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sanyo Televison and Video Experts

The Knight
The Knight

Level 3 Expert

76060 Answers

 Grubhead
Grubhead

Level 3 Expert

5686 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Are you a Sanyo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...