Questions & Answers for: Magnavox no power to my tv


Question about 32MF338B 32 in. LCD HDTV

2 Answers power supply board have problems,it dead.That the board,where the power a/c cord plug into it.Tries websites like, to buy a whole refurbish power supply board for the ...


Question about 37MD359B 37 in LCD TV

1 Answer

...nothin The TV is in Calibration mode. Take the original remote and press (Arrow up) (Arrow down) then (The power button on the TV) ((NOT ALL AT ONCE BUT IN ORDER)). Do it over and over if you need


Question about 32MF338B 32 in. LCD HDTV

1 Answer working on power supply board should be done by a skilled worker. Because there is risk of electric shock even if the power is disconnected. some of the capacitors will hold charge even if the ...

TV still won't power on. Everything else under the hood looks unharmed by the surge. When I plug TV in it doesn't blow the fuse. Help!! Thanks, Most likely your power supply is damaged and

...TV SUNNDNLY WENT DEAD NO POWER I OPEN THE BACK THE FUSE WASE BLOWN OFF I INSTALLED SAME KIND A FUSE AND TRIED DIFFERNE OUTLETS, BUT IT IS BURNING OUT WHAT SHOULD BE WRONG OR WHAT SHOULD I CKECK NEXT? ... on ...what is wrong????? I have unplugged the power cord from TV and wall and still nothing .. The only response I get is the red light turns off when unplugged Bad power switch or power

Question about 19me601b/f7 19-inch 720p Lcd Tv

2 Answers

TV will not turn on power went off and when it returned, the TV will not urn on. Check the wall outlet, make sure there is power at the wall. If not, check the breaker panel. If there is power at the ...

Question about 32MF301B/F7 32 in. LCD TV

2 Answers not replace the diode. Now replace the fuse, your TV is repaired. If you cannot find D620, You will search for D611. In this case the same model TV just a minor number difference (power

Question about 19MF330BF7 19 in LCD TV

1 Answer it does not turn on deres no sing of power but i check for voltage whit my multimeter and theres voltage. but in one of the block of the tv were you conect the tv antena de voltage droops 0v when ...

...TV power for about a minute. Plug TV power in. Turn TV on and try remote again. If no luck, make sure no other IR devices are in the room and turn off any lights and try again. If no luck, try a new ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Magnavox Televison and Video Experts

The Knight
The Knight

Level 3 Expert

76060 Answers


Level 3 Expert

512 Answers

Tom Chichester

Level 3 Expert

52421 Answers

Are you a Magnavox Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides