...power surge Hi, Our dishwasher worked fine until today. I tried to use it and there is no power to the control panel. I push Auto Clean, and nothing happens, no lights turn on when I press any of the ...
...power came back on, such as by a surge. i bought my maytag quite series 300 about 4 months ago it just started turn on without pushing the buttons and want shutoff when you touch the start/cancel ...
...power surge. fixed it - this week - turrns out the power wire under the front was corroded in the plastic joiner - on pushing the wires around , the light flashed on and off- re connected and ...
...power surge Hi, Our dishwasher worked fine until today. I tried to use it and there is no power to the control panel. I push Auto Clean, and nothing happens, no lights turn on when I press any of the ...
...power surge it will not fill with water it keeps humming like it is trying to fill but never does water line is clear no problem there any suggestions thanks Un plug the washer and let sit for 5 min. ...
Question about 24 in. MDB5600A Jetclean II Built-in Dishwasher
Maytag Quiet Series 300 only goes to RINSE ONLY No matter what buttons we push, it automatically goes back to 'rinse only'. We will push 'normal wash' and all the correct buttons will light up. The ...
...type of Dishwashers. almost certainly its the board again. If you do decide to replace it again, suggest you install a surge plug on your power cord. Does wonders when you have power
Question about 24 in. MDB5600A Jetclean II Built-in Dishwasher
...power surge that fried something. try shutting the power off to the dishwasher for 15 minutes and then back on. This works (Solution #1). I had the exact same situation with a house power outage. A ...
Question about 24 in. MDB5600A Jetclean II Built-in Dishwasher
...flip the switch for the breaker associated with the dishwasher to the "On" position if it happens to be set to "Off" because of a power surge. I hope you find it very helpful. Thanks for using ...
Question about 24 in. MDB5600A Jetclean II Built-in Dishwasher
to buy the socket with the reset button and install it. You don't need it to run your washer, however it gives your washer added protection by tripping the internal breaker when there is a power surge
Usually answered in minutes!
915 Questions
809 Questions
800 Questions
690 Questions
469 Questions