Questions & Answers for: power supply on wd 62525

Power Supply Board assistance - Model # WD 62525 I need help finding where I can purchase part # 930B921002 for Mitsubishi DLP Projection TV Model # WD-62525. Any assistance would be much appreciated.

...power supply that may go bad. You can tell by the bulging tops that are not flat. Two 3300uf caps go bad in the power supply regularly as well (this gives a lamp error). I recommend getting a service ...

POWER SUPPLY for a WD-62525 MITSUBISHI DLPTV The picture went out on my 62" MITSUBISHI DLP TV while we were watching it.The lamp L.E.D. on the front of the TV came on solid red.I had just replaced the

...WD 62525 tv's screen wouldn't turn on and the replace bulb light was red. I replaced the bulb and now when I power my tv on I hear a static sound but the screen remains black and never comes on. The ...

power supply / 2005 wd-62525 mitsubishi tv how to remove power supply board ? You can get the V26 Power board repair kit at the following link the kit contains step by step instructions with pictures.

I found that it was 2 caps on the power supply board. I had both caps replaced and it worked perfect. While it is apart see if any other caps are bad( if they are puffed up in the center they are bad)

...would look at the Ballast and or the Power Supply to cause the problem. I would recommend a professional to look at it if it is not correctable from the Main Menu of the set. Hope this helps, ...

...was like scrambeld cable screen went green then blue then off bulbs are not cheap 2004 mits.wd-62525 not bulb component is damaged in power supply serction shutting down to protect other ...

...power supply board..Just follow this instruction to fix your TV..1. Open the back cover of your TV.2. Look at the power supply board..Its normally connected to the power cord..3. After that,,try to ...

...power supply board what else could it be? you might need to have voltage checking at this time. if their is a dc output voltages at the power supply board.if none the main board will not turn on.then ...