...power window cable, mirror cable, and door and lock controls. Once you get all the cables disconnected, look for the tiny plastic clasps over the cover of the metal rods for the door and lock ...
mirror. Now, on to the repairs. I managed to do it in about 2 hours outside my garage with a socket set and some basic hand tools. - Open the passenger door and remove the door trim (the large plastic
power windows quit on it Sunday afternoon in route to Nags Head, NC. In addition the "map light" between the two Sunvisors, the electronic compass in the rearview mirror and the radio all went out too
...mirror (small triangle black plastic piece). this should now allow you to set the door panel aside, check to make sure you have removed all the clips. carefully remove the plastic lining cover the ...
Question about 2000 Intrigue
...remote mirror control and inside door handle bezel, as equipped. 13. Install the window regulator handle or power window switch. 14. Install the door trim plate, seat belt retractor cover or
Question about 2000 Intrigue
...mirror finish replaces the old eyesore hard drive enclosures of old. Page 2 Transfer interface USB 3.0 (Reverse compatible with USB 2.0/1.1) Transfer rate Up to 5 Gbps (USB 3.0); Up to 480Mbps (USB ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions