Questions & Answers for: power light cannon printer wont

...power light does is flash. 1. Turn off printer 2. Hold down Resume button and press Power button. 3. Keep holding down Power button and let Resume button go. 4. Press Resume button 2 times then let ...

...light staying on. This some times works. Also if you are using the Refillable ink cartilages stop they always cause major issues 1) With the printer powered off but connected to a power source, press ...

...cannon and they say you can not refill their cartridge. The Canon rep told you the correct information. The printer companies have included circuits on their cartridges that will not allow you to ...

cannon mp170 wont do anything orange light flashes twice then pauses then flashes twice and carrys on hi i hope it workstry these ProcedureReset Cannon Mp170 Resetview full content : ...

light on. Cannon MX310 turns on but screen not turning on and the alarm light wont turn off it just stays solid. got it from a friend and it worked fine. Please help. Check the print head. Get a cloth

cannon mx452 the error light wont go off paper got jam paper is out but the error light wont go off can print try to check if the is a pieace of paper remain the machine or check the seasor where you ...

...power light goes out immediately. power cord works, power module seems to be putting out 24v, but power goes out within a second once turned on. short circuit in printhead or in logic board, try to ...

...the power cord from printer and then plug it back in but when I push the power button turns on long enough to say Cannon and then turns off There might be a problem on the power supply of the

...power light for the Cannon MP160 is on but no other lights come on when I press "print" to indicate what the problem might be. I am not really good with computers. On my Cannon printer the computer ...

...power button and the orange light comes on and stays on? see the link , ...