Questions & Answers for: Shuttle power led blue amber

...AV42.jpg Wires to connect: Power Led +/- HHD Led +/- M/B SW Reset SW Thank you! sorry friend its not accessible here. send it to my mail [email protected] Thanks ...

...energy (enough to run some LED lights) but not enough to power up the system. That's where I would look. If that is not the problem, then I would look to the capacitors on your motherboard. Good

...LED power blue and it pulsates bright and dim AND the CPU fan pulsates fast/slow. The hard drive spins up, but the computer never outputs anything to the monitor. It is stuck in a continually ...

...monitor but it just wont do anything; the desktop wont turn on but you can hear the fan and see the blue light on (the red light wont do anything) check the caps lock led and number lock led

...led illuminates when I press the power button. I'm guessing the psu is faulty but have not be able to turn it on using a connection between pin 8 and ground of the atx 20 pin connector with both the ...

...power LED, HDD led, and speaker. The pin arrangement should be in your motherboard manual. If that's not what you're talking about please clarify. If you're in the Washington DC/Rockville MD area, ...

Where does power switch plug into ? (h.d.d. lead- power led- reset sw- power sw . Power SW header

...power supply LED that flashed intermittently. I tried to remove the shuttle from food supply and the LED turns on normally without flashing, when I connect the power supply to the shuttle, the LED ...

...Amber power light and fans running Motherboard light is on, doesn't complete power on cycle. Monitor flashes the dell screen and then only fans run. Power light is amber power off 1st..then ...

...power LED wires hook to the PLED Pins. There is usually a green and a white wire. The GREEN sire goes to the "+" pin. The GLED pins are for the SLEEP switch if you case has one. The RST pins are for ...