Questions & Answers for: Sunpak power iso

...iso settings but what is on the bottom right? Is that for the Power settings? Also please can I get a Photo activated send and receive unit that is reliable but less pricy than the canon product to ...

...mean that in, at least, some cases the strobe fires normally and the internal sensor controls the power as it should, then the most probable cause is a diry contact at the either end of the PC cord ...

I just got the frame and it won't power on. I plugged the power cord into the frame and turned the switch to on and it won't do anything. Have you already got pictures on there. It won't display ...

...power supply AC. Regards Firstly, be sure to check flash voltage. Your 30D may accept max 6V so that your camera can be shot if the flash unit has higher voltage than 6V. 1. Use low ISO to keep low ...

...use rechargeable NiMH "C" batteries. I regularly have a recycle time of 5.5 sec. at full (1/1) power. Seeking faster recycle times, I purchased the Sunpak AD-26 AC Adapter. Using the adapter, I ...

can I use sunpak 1600a flash (older) with Pentax k10d dslr ? Yes, it's possible. The flash sensor is calibrated for a 35mm optics & iso (asa). You may have to "UP" your digital camera's iso ...

...i take a picture the light is very weak Are your pictures properly exposed? Does this flash have power settings on the back? If so, move it back to full power. If your pictures are properly

WHERE to send sunpak 622 for repairs the little pegs that adjust the distant ISO and etcs. need to be replaced as have broken off Alzo Digital, CT, USA

how long does it take charge the sunpack 510 batt using the qbc-5 Hi, Sunpak uses different power sources on their high-power handle mount (a.k.a. hammerhead) flash guns. The most common is the ...

ISO feature if your camera has one). 2. Slide the Mode Selector to "A" (Auto position). This will be Auto Thyristor mode on the flash. 3. Slide the Auto F/stop Selecct Know to desired lens openning -