Question about TS620-2 Synchronized Lightning Pulses 2 channel 620W PLASMA SPHERE Amplifier Car Audio Amplifier
Power Acoustik TS620 watt amp with the lights on it. I have it hooked up to a 12 inch hi fonics 600w sub. It was hooked up and working for about a day and the next morning when I turned the car on the
...have a power acoustik 5500d reactor series.it is brand new.i have already unhooked everything and hooked power and ground and remote wire.PLEASE HELP!!!!!!!! Maybe the audio amplifier IC´s are ...
Question about A3000DB Car Audio Amplifier
...power acoustik amp with 6 gauge wiring kit i hooked up everything correctly but the amp comes on in protection mode then switches to on but no sound ever comes from the speakers one think the picture ...
Question about GOTHIC OV2-1200 Car Audio Amplifier
power acoustik gothic seaiers ... It had worked just fine since i got it. I went to put my system back into my car this summer and my amp will randomly shut off... it doesnt go into protection mode it
...power, ground and remote wires intact. Try turning on again. If you still have a protection light your amp is faulty. Hopefully you have warranty. Double check all connections. Good Luck.A thumbs up ...
...Power Acoustik employs however I don't they have input short protection. You can verify it by just unplugging your RCA cables and if the unit still goes into protection the problem exists in the ...
...power acoustik ibm12000d amp had it installed to weeks ago wired at one ohm to a 15inch acoustik p3 sub worked good for to weeks hit good and everything but now its cutting off when turned up I kno a ...
...Power Acoustik LT-980/2 car amp, it keeps on going into protect mode. if it goes into protect mode when u turn the car on, theres possiably a short in the wiring, check ground remote and power for ...
power acoustik bafm2000/1d no power coming from channel green light not going to protect mode all wire are ok what could it be inside the amp that making it do this HelloAny one channel circuit of the
Power Acoustik amp I have a power acoustik 4500 gothic series amp that quit working and is in protect mode First thing to do is check the fuse. If it is still in good condition then you may have blown
Usually answered in minutes!
687 Questions
481 Questions
236 Questions
236 Questions
240 Questions