Questions & Answers for: poulan wild thing bar oiler

bar off and clean out the oiler hole. There is usually some buildup of sawdust in the hole. Clean out the grove that the chain guide runs in all the way around the bar. You can see the injector nozzle

...oiler not working Several causes exist. Most likely are: 1) Clogged oil-hole in bar. 2) Clogged strainer in oil tank. (part # 530056533) 3) Unhooked pickup hose in oil tank. (part # 530038373) 4) ...

...poulan wild thing 18" and both leave there oil in the case when sitting I beleive the fix would be drain it after use and clean up. Find a replacement oiler from Poulan and replace the leaker! The ...

Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin: I own a Wild Thing 18". I don't believe the auto o... I own a Wild Thing 18". I don't believe the auto oiler has ever worked. We used this briefly and the ...

when cutting wood saw will not oil chain whats the problem make sure oiler jet under the chain tightener plate is clean even take bar and chain off and start saw

Poulan wild thing, new chain and bar (now burnt up) oiler not putting out oil. Chain and bar oil bought at tractor supply same as saw. Where do I begin to find the problem or is it just shot? check ...

...oiler will not work i took the bar and chain off cleaned everything but it will not oil the chain Most machined will have an oil filter in the tank, drain the chain oil out and fill the oil tank with ...

Poulan Wild Thing bar oiler adjustment Where is the bar oiler adjustment. there is no adjustment for the oil flow i find the screws that hold the pump on loosen up and then leak oil 

...Poulan Wild Thing chainsaw Not enough oil getting to chain. if you remove the bar and the tin guides you will find the oiler  i have seen when not enough oil is getting to the bar there is saw ...

...oiler leaking Is it really leaking or just oozing down the side of the bar and engine block due to a totally crud-filled oil slot in the guide bar?? I'd suggest pulling the chain and bar and inspect ...