Gas Oil Mixture Have a Poulan Wild Thing 2375 Chainsaw and lost gas/oil ratio guide. 50-1 or more? USE 50 TO 1 RATIO BETTER MORE OIL THAN LESS WORST OUT COME A BIT MORE SMOKE RATHER THAN SEIZURE
Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
poulan 18" wildthing gas/oil ratio ? chainsaw 40:1 All poulan products use 40:1. However 32:1 is ok too as it will give your machine longer life.
Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
poulan woodshark 1950 gas to oil ratio Thats and old saw, you have to run those very rich usually 20:1
Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
Lost my manual for my Poulan Wild Thing 18" Chain Saw Could you tell me what the oil and gas ratio is for my chain saw. thanks Brenda All the info I have indicates you mixture should be 40:1
Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
...This Chain Saw requires a 40:1 gasoline to oil mixture. This is typical for all 2-cycle motors. More information can be found here: ...
...poulan wild thing chain saw please? Use a quality 2-cycle air-cooled engine oil. Poulan recommends a good quality 2-cycle air-cooled oil designed to be mixed at a ratio of 40:1 (A 40:1 ratio is ...
...engine oil to 1 gallon of fuel. This is a 40:1 ratio. Read more: How to Fuel a Poulan Wild Thing Chain Saw ' eHow.com http://www.ehow.com/how_4464807_fuel-poulan-wild-thing-chain.html#ixzz111BNae6Y ...
poulan 2375 le, how much gas and oil do i need to mix? The correct gas/oil mixture is 40:1.. NOT 50:1. 50:1 is the fuel to oil ratio. Be sure to use fresh gas, a modern synthetic chainsaw oil, and mix
Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
whats the best ratio of gas and oil should i use on my poulan wild thing 18" 2375 chainsaw 50:1 = 2.6 oz oil to 1 US gallon of mid grade gasoline.
Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
poulan chain saw wild thing will not start Unable to start. Any ideas simple things first right fuel /oil ratio in tank ? aircleaner not blocked off with sawdust? stop switch set to correct "run" ...
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions