Question about Pro 16-Inch 38 cc Anti-Vibration Chainsaw #PP3516AVX
...poulan 2150 chainsaw. I replaced the I have a poulan 2150 chainsaw. I replaced the primer bulb. I alo bought new fuel lines. when i removed the bulb, there were two fuel linee, I think I see where ...
Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
...questions or need additional help please reply below and I will get back to you. Thank you for using FixYa and Good Luck. HTH Lou Zbypass the primer button on a Poulan Pro Classic pp4218avx chainsaw ...
...Poulan Model 2075 chainsaw. The primer bulb cracked. I replaced it and installed a Walbro D10-WAT carb gasket kit. In the process, I forgot the proper routing of the fuel lines from the fuel tank to ...
Question about Pro 16-Inch 38 cc Anti-Vibration Chainsaw #PP3516AVX
POULAN CHAINSAW THAT THE HOSES ON THE CARB HAVE BROKEN OFF FROM THE PRIMER BULB I SEE WHERE THE SMALL ONE GOES BUT CANNOT FIGURE OUT WHERE THE OTHER ONE HOOKS UP I ONLY SEE ONE SPOT FOR A HOSE TO HOOK
Question about Pro 16-Inch 38 cc Anti-Vibration Chainsaw #PP3516AVX
Poulan Pro Chainsaw, PP3516AVX Replaced fuel line since it broke from inside. Thought that was the problem since chainsaw was working great. It started with hard to start, saw the priming bulb was not
Question about Pro 42CC 2 Cycle Chainsaw, 18"
...poulan pro 260 ACE Hardware has everything you need, I have the poulan also and all you need is the torx screw driver and get the little clamps for the fuel line, I got the kit which had all in ...
Question about Pro 14" Gas Chainsaw 33CC P3314
Poulan Pro 260 have been replaced along with the spark plug. I know the primer bulb is good because it seals when I block each of the nipples, but it won't draw any fuel into the carburetor. Does this
replacing primer bulb poulan p3314 Carb mounted, remove the four screws. Frame mounted, remove the two screws.
POULAN PRO PP446 HOW TO REPLACE PRIMER BULB PRIMER BULB get a new one and just unscrew the screws that hold it on and just put the new one back on with the srews.
...primer bulb? the primer bulb is broke i need a video showing me how to replace the primer bulb. What is the MODEL of your saw.? I'm guessing its possibly the PP4218 here's a couple of manuals to help ...
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions