Poulan Pro 260 42cc. Need a manual. This is a refurb I've had for about 6 years. Getting harder and and harder to start, and even with new chain, could not maintain a steady cut for very long. Last ...
Question about Pro 42CC 2 Cycle Chainsaw, 18"
...260 chainsaw when i went to use it ofter 6 months,it would not start.had old stail gas. i change the gas,cleaned the air filter,check and cleaned the spark plug,still not starting. one thing that i ...
...260 Pro 42cc. I just got it out and when I pushed the primer bulb it did not return to the un-depressed position. There was no fuel in the bulb. I pulled the lines and gas pumped out of one line and ...
...260 42cc starts good but after using for awhile and shut it off it wont start, it will fire and run a few seconds and quits, does this every time but wont start and run, if i let it sit a few hrs and ...
poulan pro 260 I can get it to start but it will not say running Hi timhamilt827 ***********************************************************************************************************************
Question about Pro 42CC 2 Cycle Chainsaw, 18"
...poulan pro 260 ACE Hardware has everything you need, I have the poulan also and all you need is the torx screw driver and get the little clamps for the fuel line, I got the kit which had all in ...
Question about Pro 42CC 2 Cycle Chainsaw, 18"
my poulanpro 260 42cc it start about 10 second then cut off please help. The first thing to change is the fuel filter. If it still wont run, most likley you will need to rebuild or replace the carb.
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions
