Poulan Pro 36cc won't start replaced spark plug and plug wire assembly. Still won't start. If I take the plug out and pull the crank I see no spark. Spark should jump at least 1/8 inch gap.You would ...
proper spark plug gap for poulan chain saws I believe the proper spark plug gap for poulan chainsaws is .025-inch. That goes for all units.
...Poulan 20 inch pro will not tighten If you've got the adjustment all the way out, you may need to remove a link or two from your chain or replace the chain. You can find replacement chains at ...
Question about Pro PP4620AVX 46cc Gas Chainsaw With 20" Bar
Can i put a 18" bar on my poulan pro 4620, it came with a 20" bar? Yes but you will need to get an 18 inch chain also.
Question about Pro PP4620AVX 46cc Gas Chainsaw With 20" Bar
...poulan pro 4620avx came with a 20 inch bar. I wanna know if I can use a smaller bar and chain on it. Don't always need the 20 inch saw for small jobs? yes you just need to keep the link size as ...
Question about Pro 20-inch 2-cycle 50cc Gas Chainsaw With Case
...poulan pro chainsaw dies when I give it gas and I think the bar and chain oil is leaking out during storage. leaking chain and bar oil during storage and dies when I give it gas try and run it with ...
have a 20 inch poulan pro with the tooless chain tenshioner and chain wont stay on saw If the chain is staying tight, your bar might be bad
Question about Pro Pp5020av 20-inch 50cc 2 Stroke Gas Powered Chain Saw With
what size file for a 20 inch poulan chainsaw? http://www.ehow.com/info_8137879_size-file-do-need-chainsaw.html
Question about Pro Pp5020av 20-inch 50cc 2 Stroke Gas Powered Chain Saw With
sharpen chain on poulan pro 20 inch chainsaw how to sharpen chain It can be done with a file of the right size for the chain. I take my chain off the saw and to a chain saw shop for a professional job
Question about Pro 42CC 2 Cycle Chainsaw, 18"
...poulan pro 260 42cc chainsaw Yes, it should work no problem. Yes it will work fine. You just cant put anything bigger than a 20 inch bar and chain because the saw will be underpowered and it will run ...
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions