Questions & Answers for: poulan p4018 chain saw

...poulan carb. A standard screwdriver will not do. Model #P4018 WTL I just finished looking at mine and I think they made it that way so back yard mechanics dont tinker with it. If there is a Poulan ...

...P4018-545103414-952802151.pdf If you using any Bar Oil (30 weight with stuff added to make adhere to your bar and chain) and not a light weight motor oil I recommend you contact Poulan and make them ...

...POULAN CHAIN SAW MODEL P4018 WILD THING. THE CARB HAS 2 BRASS PLATES. THE ONE FOR THE CHOKE IS IN BUT THERE IS NONE IN THE TOP . iT HAS THE ROD BUT NO PLATE OR SCREW TO ATTACH IT. WOULD THIS KEEP IT ...

...chain with for my Poulan Pro pp4218? Hi, A 3/16" round file will work great... heatman101 So wrong , The PP4218 uses a 5/32 file to sharpen the chain. Using a 3/16 will put the cutting angle off by ...

need to replace spark plug On page 16 of the link, you will find the disassembly, installation instructions of how to replace the spark plug, as well as the size. I hope this helps. ...

Poulan P4018 need to reassemble brake/clutch but how? Thanks This machine has an inboard brake, there are no parts available for this brake, it is not easy to re assemble the spring, and load the ...

I have a Poulan 4018 that is not getting any fire to the spark plug. It has had hardly any use. Do I need to replace the coil? I installed a new plug with no results.Please advise. Steve Before you go

poulan 4018 pp4018 proper fuel mixture?

how to adjust the fuel mixture On the carby there is a H screw and a L screw just undo the h one a fraction ,until the revs pick up.

what is the spark plug gap of my poulan gas chain saw model p4018 40cc/18 The plug gap should be 0.5mm It would be 0.25 gap to your spark plug Hello. Set it to .030 and your be fine