Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
Poulan Wild Thing? close to the "H" and "L" carb idle adjustments there is a "T" adjustment. I am curious what exactly this is. My chainsaw has started to not run at idle and as it gets warmer it will
Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
Poulan Wild thing, 18", will not idle after throttle is released. I have a poulan wild thing, 18". I have trouble getting it started. When it does start it will idle, but seems to quit after I pull ...
Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
...poulan wild thing 2375 bogs out when throttle My poulan wild thing 2375 bogs out when i try to throttle it. What are the carb settings (the high and low jets) ( idle screw) so when i throttle it it ...
Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
...poulan wild thing saw idles too fast and fast idle needs to come down If idle speed is the only problem, there is a screw (not the two jet screws H and L) for this purpose. Turn the screw CCW until ...
Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
poulan 3416 chainsaw? are they two separate screws? one for fast, one for slow.for the slow setting, first start the saw then screw until motor runs smooth without chain moving....if to slow the motor
Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
Poulan Wild Thing 18" Gas chain saw starts no problem but it runs for maybe 30 sec. then stops each time. I changed the core same thing. Do a tune up. It is easy. Just take out the carb and clean with
Question about P4018WT Wild Thing 18Inch 40cc 2Cycle Gas Powered Easy Start Chain Saw
Chain won't stop when throttle pressure is released. Start the engine and allow to warm up. Turn the idle speed screw (not the jet screws) CCW to reduce engine speed until the chain stops even hinting
poulan wild thing chainsaw has 3 tuning screwes h,l,t and they have all been messed up how many turns out do they all need to be from all the way in Check the fuel filter, air cleaner, and muffler for
Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
poulan chain saw wild thing will not start Unable to start. Any ideas simple things first right fuel /oil ratio in tank ? aircleaner not blocked off with sawdust? stop switch set to correct "run" ...
Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
Poulan 2375 Wild Thing chainsaw won't start I hope this question isn't too long. My chainsaw was running rough, so I opened it up and found one of the nuts that hold the Carb in place had come loose. ...
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions