Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
leaks oil in case from chain oiler just purchased new saw from true value store#13569-2 albany,ky. hi check the oil line,the oil hose has to be at the right place. regards savumihai71
...poulan chain saw bar oil leaks out during storage but seems insufficient when running there is some debris blocking from entering the bar and when sits it seeps out,clean bar and are under chain ...
...Poulan and Craftsman gas saws. Take off the chain and chain guide and clean out all the saw dust etc. Start saw without chain and look for port where there are signs of oil. If port is clear of ...
poulan model 1800. The saw runs great, and the blade gets plenty of oil. The problem is that it puts out way too much oil, and when the saw is shut off, it keeps pissing oil out, so much so, that if i
poulan 14" gas leaks bar oil all over, plenty on bar/chain, using thin synthetic oil. Use actual bar oil sold for that purpose. It's thicker and won't run out like water. Synthetic oil is very thin ...
poulan farm hand chain saw and when we put it in the case to store it and go to bring it out again, there is a pool of bar oil there i cannot find why it keeps leaking when we store it if you have any
...poulan leaks out it chain oil when i put it away and it is not just whats on the chain So does my Craftsman, 2 McCullochs, 2 Pioneers, and a Remington. The oiler creates a siphon that is very ...
Automatic chain oil leaks oil? Automatic chain oiler leaks oil on the poulan model pp3416? possible crack in the reservoir, or line has come loose
Question about Pro Chain Saw 46cc 20"
...Poulan Electric Chain Saws: 400E Poulan Pro Electric Saw http://www.ordertree.com/modelinfo/PWE/400E-Poulan-Pro-Electric-Saw/75.400E-Poulan-Pro-Electric-Saw.1.59.1.html 400EX Poulan Pro Electric Saw ...
Question about Pro Chain Saw 46cc 20"
...chain saw on poulan pro pruner to work plus too much oil is coming into chain saw blade area and shaft connector wiring was reassembled when wires were pulled out of the metal ends. since new ...
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions