Questions & Answers for: poulan chain angle sharpening

need sharpening angles I can't find sharpening instructions for a poulan chain #952051209. Can you advise the correct angles? The angle is 30 degrees.

...way to sharpen the chain you can buy a simple kit for a few dollars, there is a jig that holds the chain and a roud file that will be guided through the jig at the proper angle to sharpen the ...

...poulan chain saw cuts at angle Have a 20' Poulan chain saw that won't cut straight. Wants to angle to left. Replaced bar and chain. Seemed to help for very short time; but now angling left again. ...

which angle to sharpen Poulan chainsaw #2375 18 which angle to sharpen Poulan chainsaw ; 22, 25 , or 30 degrees ??? 30 degrees

angle because the chain needs sharpening. If you want to do it yourself, you will need a 5/32 inch chainsaw file and here is a website that shows how to sharpen it... http://www.ehow.com/video_4419332

...angle. If you remove the bar and chain, look at the outer edges of the chain groove around the whole bar--you may find that the bar metal has worn is such a way that the outer edges are flared out ...

angle for poulan chain 952051211 poulan pro 221 16 inch Not sure what you mean by angle of chain but if you mean for sharpening, I sharpen all my chain at 25 degrees.

...chain sharpen angle I sharpen to 35 degrees, right or wrong. I'm sure there are more aggressive angles for the larger pro-saws, but this has served me well over the years on many brands of

...Poulan chain 952051209? Unless it has been changed from the factory set up it is 3/8 Low Profile and takes a 5/32 file. Remember you can go too small with the file and get away with it as long as you ...

angle for this chain? For cross cutting is 30 degrees and if you only do ripping it is 10 degrees. If you are lucky, you own a Stihl saw. If you do, notice the 'witness marks' towards the rear of each