...cover plate and access the shaft and remove the jammed nail. Then replace all back in reverse order (pretty easy to do). Of course, ensure no air supply is connected to the nail gun when you do
Question about Porter Cable-Cable No.BN125A 18GA1-1/4"Brad Nail Kit
...with the gun) to release it. Mine was caused by a bent pin, that happened when I hit the hose and knocked it off the bench. When I finally replaced it (CPO/Porter Cable), it's been fine ever
...the gun strait down on a board, with no nails in it , and see if it fires then ps. have you oiled your tool lately, 5 drops of pneumatic tool oil in the air input of the gun every time you use ...
Question about 1" 18 Gauge Brad Nails [Misc.]
...Porter Cable nails are being used, clean and lube the nail shoot (with a few drops of air tool oil). If that does not work, Invest 19 dollars in a new, 18 guage nailer at Harbor Freight. I have 2 of ...
Question about 2" Flooring Cleat Nailer FCN200
...porter cable fcn200 cleat nailer --how do I get it out? Hi, It looks like those guns have a problem with driving the last few nails... so don't let them go all the way down before refilling... There ...
Question about Factory-Reconditioned Porter-Cable FC350AR Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer
Was trying to reload nails into my FC350A nailer. My hand slipped and the nail pusher slammed forward. Now I can't move the pusher to add more nails. What's wrong...nothing seems broken Framing guns ...
Question about Factory-Reconditioned Porter-Cable FC350AR Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer
jammed nail gun fc350a Nail guns will jam when driving nails thru very hard wood, solid objects, allowing the gun to double fire hitting the first nail or using the wrong nails(amoung some ...
Question about Factory-Reconditioned Porter-Cable FC350AR Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer
Porter Cable FC 350A framing nailer and the add said it handle 28 degree nails. However when I load them in the nailer it shoot one nail then it jams. The manual for your gun specifies 34-degree nails
Question about Factory-Reconditioned Porter-Cable FC350AR Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer
...air no nail at 90 lb. pressure This gun is about 2 years old but seldom used. Sounds like you have a nail jam or a broken driver blade - there are other issues that can cause this but the most common ...
Question about Factory-Reconditioned Porter-Cable FC350AR Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer
...porter cable 16 gauge finish nailer will not fire, I have opened it checked all inside components, it is not jammed, o rings in good condition, what more can I do, it has been used very little I can ...
Usually answered in minutes!
317 Questions
162 Questions
122 Questions
