Questions & Answers for: porter cable adjusting pressure

...Porter Cable finishing nailer. The nails will not sink into molding. I have adjusted everything the instructions tell me to but still won't sink. Help Please. i take it you also adjusted the air ...

adjusting the gun, you can also adjust the air pressure you are sending to the gun by reducing the pressure coming out of the compressor. Regards, Joe Reduce the pressure at the comptessor with a good

...porter cable BN 125A brad nailer Hello. To adjust the depth of the nail you have to increase or decrease the air pressure from the compressor. Look at the compressor and you will see a knob or dial ...

...Porter Cable C2001-WK compressor. Air leaks out of pressure regulator adjustment knob constantly. Builds up just enough pressure to use tools but never reaches full pressure so it runs constantly. ...

...porter cable compresser, keeps running -blows, blowout valve, compresser works good new pressure switch? thanks ,scoop Pressure switch can be adjusted to lower pressure (most are set between 125 and ...

...porter cable air compressor The problem is it will not shut off automatically but will turn on.I have to turn it off manually.If the air pressure exceeds over 120 lbs and is turned off the air ...

...Porter Cable C2002 compressor out of the box, plugged it in, turned it on, rotated the regulator counter-clockwise and the pressure gauge does not move off zero. Hi alchids... You only need to adjust ...

...porter cable 6 gallon compressor. The motor used to cut out at 150 psi, but now it cuts out at 135. Is this a faulty tank pressure gauge misreading the pressure or a motor cutting out too early it ...

porter cable pancake air compressor the compressor builds pressure and the regulator works turning it on and off but. when I attach the hose for the nail gun. there is no pressure going to the hose ...

Porter cable compressor will not come on soon enough There should be a pressure switch that can be adjusted. You should be able to adjust high pressure shut off and at what pressure you want it to ...