Questions & Answers for: pool sweep hose tangle

...pool cleaners sweep hose is not blocked by the sweep hose scrubber. If this does not work, you will need to adjust the sweep hose screw as mentioned above. The only thing that I would add about that ...

Pool sweep wheels are not turning... Pool sweep wheels are not turning Problems with the sweep hose on these pools cleaners usually just means that you need to do some fine tuning. Start by trying to ...

...holds it on to get it to a gentle sweeping motion. It is also possible that you have too much hose weight on the pool cleaners sweep hose. Try removing some of the weight and seeing if that

pool cleaner with the hose coiled, this is probably what is causing the problem. Lay the hose out flat and stretch it slightly. Let it sit in the sun for several hours and it should help to straighten

...with these pool cleaners. Make sure the opening at the end of the sweep hose is not blocked by the sweep hose scrubber. If you have any sweep hose weights, you might need to remove or adjust

...in place. If it is too tight it will not have the slack to move. If it is too loose, it will not have enough tension to move. Try adjusting it and it should have the pool cleaners sweep hose

...sweep hose is not blocked. You might also need to adjust the power to the pool cleaners sweep hose. To adjust the motion, turn off the booster pump and turn the sweep jet clockwise to increase

...sweep hose merely trails behind the cleaner. It doesn't swish from side to side as it has for the two previous pool seasons. This is its third year. open up the screw on the bottom that will ...

Sweep hose tangles in wheels Sweep / Whip hose is too Active... turn the adjustment screw 'In' to make it a more Lazy action.

wht do my arneson pool sweep lines tangle make sure the swivels arent worn out just turn them to see