Questions & Answers for: pool filter valve harde turn

...pool store with the brand of filter and get the part you need without any trouble. Be sure in the future that no one adjusts the valve setting without turning the pump off. Moving the handle with the ...

pool store with the brand of filter and get the part you need without any trouble. If this answer does not fix your problem, please comment with additional details prior to rating the answer. Positive

pool store with the brand of filter and get the part you need without any trouble. If this answer does not fix your problem, please comment with additional details prior to rating the answer. Positive

...filter tank it can cause the debris to come back into the pool. but they also said that sand comes back to if the lateral is broken. so my question is, can a lateral in a filter tank be broken or ...

Pool is 16 x 32 inground. The filter is a hayward pro series top mount 7 position sand filter. It has a dial a flow valve where the water fills the filter basket. it has 3 setting 1/2 port, 1 port and

...pool water pH is high and proper maintenance of the chemistry is neglected. As to the lid popping off, this means the pressure is excessive or the clamp is damaged. Another point to consider if the ...

...filter on pool runs but water is also coming out from hose for backwash. Thank you for posting your question here on Fixya.com. You need to replace the gasket inside the valve to stop the leak. The ...

my hayward multiport valve is hard to turn valve is hard to turn and hard to get seated either take apart and lube or replace

...Valve off because it is so hard to turn to different positions. I removed handle to clean it out and now cannot get the handle back in, suggestions? Thanks, SP pry with phillips screw driver to get ...

...through the filter. I have also seen the use of calcium based products turning the sand hard as a rock so you do not get filtration. Remember never vacuum the pool on the backwash setting. Good