Pontiac Montana Making a Loud Vibrating Noise in Back End I drove my Van home last night and it was fine. This morning I get in and turn the key and I hear this aweful vibrating/clicking/humming sound
pontiac montana awd minivan? Thanks Carman from Ontario Canada Take the wheel off. If you don't have an impact gun you'll need at least a long breaker bar to remove the axle nut in the center. It will
Question about 2001 Montana
...Pontiac Montana jack the vehicle up remove the wheel remove the brake caliper bottom bolt 15mm. lift the caliper up and slide the caliper pin out remove the caliper housing bracket 2 - 15mm. bolts ...
...front wheel assembly or hub (bearing) repair. Hi, first put the van on jackstands and take the wheel off. then take the brake caliper and bracket, these are removed by loosening the bolts that hold ...
...front hub? I belive its a 32 mm socket that fits it, if the axle has been replaced it may be a 34 or 36 mm socket to remove, this nut is on real tight, i would go to a garage and have them loosen it ...
size socket to fit front axle nut for 2006 pontiac montana sv6 what size socket does it take to fit axel nut that holds front bearing hub spindle. M27x2
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
