what is point gap on 9n ford tractor .020
...points opening? Are they fully closing? Check for a grounded connection/wire in the dist? Be very careful how you set the coil onto the dist. I have a ford 8n tractor. Change the sparks plugs ...
Question about 8n,9n,2n, Tractor Starter With Drive
...points, and ignition coil. Point gap at .015, new condensor. 6 V battery fully charged. No voltage drop to ignition coil. Results, no spark. You might check ground. some of these units were ground ...
Question about 8N Tractor
...8n tractor. Change the sparks plugs , condenser, and point and gap them. I have spark now, but will not start. There is gas goin in the carb. It gettin to be a headache , can any one help me please. ...
points gap for 1953 8 n ford tractor Here's how to do it: http://www.ehow.com/how_7368031_set-points-ford-8n.html set the point gap a .025
Question about 8n,9n,2n, Tractor Starter With Drive
need to know gap measurement on the points of a farmall super m 0.025 in or 0.63 mm
...fire through sparkplug wires The problem sounds like it is your distributor. Replace the ignition points and condenser, make sure the points are gapped properly. If you still don't get fire at the ...
gap ford 8n .015 for 2N, 8N & 9N The 8N also had problems with ignition switch causing several troubles, cheap and easy to replace....Below link is an excellent site. http://www.yesterdaystractors
what is the point gap for ford 8n The point gap on the 8N is 0.015".
...is the point gap for a 1948 8n ford tractor The ignition point gap is 0.015" and the spark plug gap is 0.025". More specs ...
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions