...brake lights stopped working when the hazard light button was pushed. The hazard lights do not work either. I replaced the hazard warning flasher and the fuse and still no go. PO430: Catalyst System ...
Brake light on Plymouth Sundance Right tail light works but goes out when brakes applied. Have replaced bulbs Have you checked to see if the wires are lose?
brake lights/tail lights won't work Which fuse works these lights....the bulbs are new... tail light fuse and brake light fuse, and they are marked, if they are good then you have a bad light switch ...
...brake light doesnt work when the head lights are on If the old one had two wires and the new one has three wires you have the wrong socket or you replaced the wrong socket. The green wire is ground. ...
Question about 1990 Sundance
...sundance my backup lights and heater blower doesnt work. when i put the car in reverse the brake light and airbag light comes on and when i try the heater blower it does the same so if any one could ...
Question about 1994 Sundance
brake lights and turn signals don't work on driver's side only I have replaced all bulbs. have not checked flasher relay because brake light and signals work on passenger side may be you need ...
Question about 1989 Sundance
Hi. My high mount brake light, and dome light do not appear to be working, despite changing the bulbs. What could be the problem/solution? I believe they work off same fuse
Question about 1989 Sundance
Plymouth sundance the taillights and hazardous light and turn signals are working what can it be thanks Hi Bradley,it could be your stop light switch,could be loose or bad,it's connected to your brake
Question about 1989 Sundance
1989 plymouth sundance tail and brake light work but are very dim Run a new ground wire to them.
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions