Questions & Answers for: plug neutral safety switch 2004

...plug where is my 2004 hyundai santa fe drain plug Hi I am very assumming that you are looking for the drain plug for the rad, right? It is located in the bottom of the rad, right side of rad standing ...

...Santa Fe 2001, 6 cylinders automatic. The other day while I was driving the transmission passed from drive to neutral and stayed there. Is that a problem with the transmission or with it sensors? ...

2004 Santa Fe: Have a 2003 Santa Fe with 2.4 L eng. Getting a mis... Have a 2003 Santa Fe with 2.4 L eng. Getting a miss fire on plug #4. This appaers to occur when excelerating. Eng lite came on / ...

...safety reset switch or something that not allowing the fuel to flow because of the accident and went in to safety mode? thanks for any help to lead me in the right direction if the battery was, for ...

...on. Impossible ! Did he have the gas tank out ? Or the instrument cluster ? Does the vehicle has a automatic transmission ? When it won't start try putting into neutral . park neutral safety switch

santa fe wont start, yesterday got it to start in neutral, today nothing at all please post question Check your start inhibitor switch.

...neutral safety switch how did you come about that conclusion? Try this next time it will not start shift the gear into neutral and try to start it again if it starts every time you shift to neutral I ...

...neutral safety switch 2004 Hyundai santa fe for Excalibur rs-450-edp remote start? I can't find this on any wire list for 2004 santa fe. The installation manual says this connection is required. are ...

...neutral safety switch Car won't start turn key have power starter won't engage Not sure about yours for sure but normally the neutral switch in American made cars are on the steering column by the ...

...neutral safety switch? If so where is it? or the ignition switch? Neutral safety switch will be mounted on trans axle by the end of shift cables usually. below are links for both ignition and safety ...