Question about 32FD9954 32 in. HD-Ready Plasma Television
...fet's are all in a row on the left side of the powersupply. You might try and changing these out if this is the problem. But if there is a problem with the Plasma panel I highly doubt u will find a ...
I have a humming noise coming from my new 50in panasonic plasma tv. Is this a common problem and if so what could I do about it? Thank you for your time. Pat The humming noise should be verry low . It
Question about 50HP66 50 in. Plasma Television
...plasma-television-repair.com and downloaded it...spent the $40..it's worth it) Don't waste your time with the Toshiba 50HP66 service manual. None of the powersupply or driver boards are in it. The ...
...supply board has failed. Had the same problem with 18 month old Samsung 42" plasma. Just been repaired by replacing two 'fused' FET switches (Field Effect Transistor). Cost including labour ...
Question about P50HDTV10A 50 in. Plasma HDTV
i have a 50" plasma and it will not power on at all. is there a common problem with power pack or is it more? is it worth fixing? there is power board problem please check fuse,cap,ic link or fets ...
just replaced 4 capacitors and my 42" plasma still not coming on. all i am getting is the red light and the green light but no picture and no sound. what is wrong now? Check all capacitors ...
Question about 50PX1D 50 in. Plasma Television
...lights and stays illuminated through the power on process. Anyideas? I have testing equipment at my disposal, ive just never worked on an lg plasma before. did you check shorted FET at sustain
Question about TH-42PZ700U 42 in. Plasma Television
How do I check the 5n2307 fets, SC board on a panasonic TH-42PZ77U Plasma TV. glad you got it as fet's can be a mystery sometimes.
Question about TH-42PZ700U 42 in. Plasma Television
Can we replace the hybrid modules found in plasma TVs like STK795-821, STK795-820, YPPD-J014, YPPD-J015, YPPD-J016, YPPD-J017, YPPD-J018, YPPD-J014C, YPPD-J017C? I mean not replacing the whole module?
...the model its a little hard to know what to tell you but I would look at the buffer board...there are some FET's on plasma buffers that are known for failure, most sets have between 4 and 8 of ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions