BUFFER on them. There are ribbon cables that run from them to the Plasma screen. In my TV, several sections of the screen do not have lines in them. These driver IC's are not hot, however the sections
...plasma tv about 2 1/2 years old I heard a popping or sparking noise and the picture went blank, the sound is perfect but absolutely no video. The most common cause of this is the Y-SUS board. It is ...
...buffer chips. make sure there is no little pin sized hole burned into one of these chips or it will blow out your new address board. other names for boards address = Y sustain sustain = Z or X ...
...plasma 55 dirctors cut. No picture or sound was told upper y board was bad replaced it and still doing same thing It is really hard to fix sets like this without voltage checks, but if you have any ...
...this problem before and fixed it My first guess would be the Y-sus board, check for blown fuses, also the buffer board check ic and look for chip on buffer ics down the left side of the set in
Question about P50H401 50 in. Plasma HDTV
buffer board(part number ND60200-0048) or do I have to replace the entire buffer board? the lower buffer board has a visibly burned IC chip on it and I wanted to know if i could replace the chip or do
...have sounds hi this fault could be one of the buffer boards, there's ic chips on these board usually burn out causing the ysus board to fail i'd look for tech in your area hope it helps ...
Question about 42PQ30 42 in. Plasma TV
Plasma heard a pop then screen went black red blinking screen How old is the set? Are you attempting to fix yourself? The popping/no picture issue is usually do to a faulty y buffer or y sustain board
...I get IC Chip Panasonic AN16479A I Need IC Chip for lower Buffer Board part # Panasonic AN16479A I would look at Ali Express. It takes a while to receive stuff from China but they have a lot of
Question about PN58B550 58 in. Plasma HDTV
...Plasma TV That had no picture but had sound I had 6 blowed capacitors I changed out the main board and the T-Con board still don't have a picture HELP me please hello, you have blown buffer board, on ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
