Questions & Answers for: plantronics 510 red flashing light

510 Headset with my phone, I recently purchased a new phone and need to sync my bluetooth with the new phone Pantech Slate C530. Please remind me Hold the up volume and the talk button (the one on the

...Plantronics Voyager 510 will not go into pairing mode. When I hold the volume + button and the call control button simultaneously as directed in the manual, My Voyager 510 does not go into pairing ...

...red LED stays on all the time. E-mailed Plantronics tech support, waiting for an answer ... It is broken, need to get a new one! No it not. It needs to be reset. So unplug the power supply, plug it ...

...plantronics 510 in discovery mode how to put the plantronics 510 in discovery mode Power the device on by holding the block(sitting at hightest point when upright) button. A blue led should flash on ...

...plantronics 510? allanrecht The steps below will show you how to put your Voyager 510 into pairing mode. To put the headset into pairing mode: 1 - Start with the headset powered on (the headset will ...

...Plantronics 510 Voyager Headset - PLN-510 Headset - Light blinking blue. Good! You'll be happy to know, this is normal. The Status Indicator flashes blue when the headset is on. When the battery ...

...search for Bluetooth devices and select "510 Plantronics". 3. When prompted for password, enter 0000. The headset will flash blue when paired successfully. Don't forget to rate if this was helpful

...Plantronics 510 Voyager: Pressing and holding down the call control button and holding down the volume up at the same time until the indicator light on the headset starts flashing red then blue. ...

...Plantronics 510 headset in your phone when prompted and enter 0000 (4 zeros) as the PIN/passcode if prompted. When paired, the Voyager 510 headset should now have a continuous blinking blue light. ...

...Plantronics when prompted. Enter "0000" (four zeros) you should now have a continuous blue light blinking. Choose "Yes" if your phones asks if you want to bond to the Voyager 510 bluetooth ...