...pitco 35 c the flame is burning yellow and not going inside the very wall i thought it might be the regulator pressure on the fryer on the back side Low gas pressure will produce low flame quality ...
...soot formation inside the heat tubes of your fryer that's why the flames can not get inside. You have to remove these soot or carbon deposits to correct the problem.This problem is caused by low ...
...First- Low gas pressure and volume, second- carbon or soot formation on burner face and heat tubes. Check first if your fryer has one of these conditions and try to address this as soon as
...pitco frialator (40lbs) are not suctioning through the tunnels and is burning an orange flame out the front of the burners instead. We are mobile unit with two 100lb tanks. We clean the tunnels and ...
...fryer still fine. they cut off at the thermostat as normal but takes longer to reach cooking temp after dropping> Flame looks week on main burnes, What coukd be causing this??? Hi there. Check the ...
Usually answered in minutes!
378 Questions
257 Questions
252 Questions
238 Questions
190 Questions
