...pitch adjustment light was staying on even though I moved the slider up and down it didnt stay as bright as in the zero point but faded a little, then all of a sudden my platter started going crazy i ...
...the past 24hrs drivers side airbag light has suddenly turned on and stayed on and I hear a new high pitched tick coming from the drivers side near the front wheel but only when i'm going slow (w/ no ...
...to and fro but does not turn, almost like two magnets passing each other, had a problem with the pitch, now go due to new board and pitch, was wondering if that had anything to do with it as was ...
Question about SL-1210 Turntable
...Pitch light fader on good deck is constantly on faintly though it becomes much brighter when i position the fader at zero? Ben UK Problem If you swapped the two TT's would the problem stay with the ...
...pitch to 0 for instanceand watch the platter by the light on the on off switch, the big dots on the plater should stay stationary whilst the smaller dots above it and below it move around it, if the ...
Question about XPS M1330 Notebook
...pitch for a new battery at my expense from their 'technical' staff. Check your mains adapter plug that connects into the laptop power socket with a multi-meter, the voltage should be slightly higher ...
Question about SL-1200MK2 Turntable
...had them powder coated at a paint shop last summer. Both were working fine but now the pitch on one unit is not working. And the green zero lock light stays on no matter which way I adjust the
...light "turn on" in the pitch control slider (green LED) the speed is not correct (big dots on platter move slightly) .Could you please give me some tips to solve this problem? Thank you ...
light for the pitch will not work but everything else about the pitch works fine. 2. The deck will not change from 33bpm to 45bpm, I have replaced the circuit board with the buttons for the start/stop
...pitch fader in the middle and turn it with a screw driver, put your platter on the unit, the plastic black plate you only have to unscrew and take off , nothing else., but like i said , but the ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions