Questions & Answers for: what is pin holes

Ad

Question about Office Equipment & Supplies

2 Answers

...covers and all covers are closed. Any ideas? Thank you Cameron The large top cover has a small pin on the right side that fits into a receiving hole on the top of the printer. The pin pushes

Ad

Question about HE2 Plus Front Load Washer

1 Answer

leaks water underneath ..repair man said there was pin hole in hose underneath and needed new hose..are they over 100 dol to replace? Doest seem a tiny pin hole could cause that much water to flood ...

Ad

Question about KSM90 Ultra Power Series Stand Mixer

1 Answer

...pin slides easily thru the two holes in the stand part of the mixer. Now carefully line up the top and bottom halves - look thru the hole in the stand until you can see the mixer's hole line up, then ...

Question about KSM90 Ultra Power Series Stand Mixer

1 Answer

I can't seem to get the right side shear pin out. I find the hole but it appears that the pin is so tight in there that I can't tell for sure. I can't see any part of the pin. It looks like there wasn

Question about KSM90 Ultra Power Series Stand Mixer

1 Answer

...draw won"t open help phillips dvd player disc draw won"t open help please Usually, there's a pin hole beneath the tray that come out. If there is a pin hole, get a paper clip or safety pin and ...

Question about KSM90 Ultra Power Series Stand Mixer

1 Answer

Craftsman Leaf Blower/Vac, mdl 316 794970. Crank pin keeps coming out of crank some, hitting reed valve, and subsequently barely runs. I have tapped it back again, and need to know how to secure. Hi ...

Question about ThinkCentre S50 8183 - P4 3 GHz (8183D9U) PC Desktop

1 Answer

..., what is the solution????? First , you need to locate the small circle hole on your dvd then use a pin (make sure that the pin that you're going to use will match going to the small hole  ...

how to put click pin back in craftsman snowblower cannot put click pin back in for 4 wheel drive, hole is not visible. Open pin, Separate pin from circle. Insert pin into hole of drive wheel, the ...

Question about 155443 Click Pin

1 Answer

pin holes now line up. Once removed, you can drive the remaining pin from the impeller, both sides so you can see through. The shaft pin remainder should be easy to see and drive out It may be awkward

pin but will fit through the hole in the sprocket and hammer it out It will not take all that much force mark the sprocket in relation to the shaft as the holes in the sprocket and shaft do not always

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2239 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...