Questions & Answers for: pilot light keep going deep

light pilot light Turn the knob on the gas valve to the pilot position. Sometimes you have to slightly depress the knob to turn it..don't use a pair of pliers. In the pilot position.. push the knob in

...and push the knob in and light the pilot while keeping the knob pushed in. After about 30 seconds let go and the pilot should stay on. Then turn the knob to the ON position and set the thermostat. ...

Pilot light keeps going out! Will not stay Lit. Check if the the gas pressure is sufficient (as stated on unit's nameplate). Check if the hi limit device is good. Check also if the thermopile ...

my fryer's pilot keeps going out. what is causing this? Defective thermocouple. It is the metal tube that is in the flame of the pilot light.

...pilot light flame goes out? You must turn the knob to the pilot position and hold it down while lighting the pilot and keep it down for about a minute until the thermocouple heats up. If the ...

light. If so, the high limit is defective, assuming the fryer is not over temperature. If defective, replace. Do not operate the fryer in this condition as there is no over temperature protection. The

light. If so, the high limit is defective, assuming the fryer is not over temperature. If defective, replace. Do not operate the fryer in this condition as there is no over temperature protection. The

light. If so, the high limit is defective, assuming the fryer is not over temperature. If defective, replace. Do not operate the fryer in this condition as there is no over temperature protection. The

Pilot light will no ignite when I follow steps on door. What may be the problem ? Defective thermocouple. If it pilot light goes out after letting go of the button, the thermocouple is not producing ...

...pilot light wouldn't stay lit replaced thermocouple that fixed then we would light it would start for a second then blow out. I replaced gas valve. It will light off but now it won't shut off even ...