Questions & Answers for: Chevrolet Silverado pid 84 engine

Ad

Question about 2002 Silverado

1 Answer

replacing starter 02 silverado 6.6 need to replace my starter, can not find a shop manual anywhere. ANyone have a step by step or link to a shop manual. Thanks. Its an 02 silverado 2500HD 6.6 diesel. ...

Ad

Question about 2007 Silverado Classic SS New Cars

1 Answer

2007 Chevy Silverado when my check engine light comes on remote start won't work after a couple days check engine light goes off remote starter works? It's a safety feature. For example, if there is ...

Ad

Question about 2006 Silverado

1 Answer

reduced engine power silverado 2006.Engine light came on.Stopped vehicule shut off engine and restarted.engine light stayed on and had lots of power. You need to have the computer scanned for trouble ...

I have 2002 chevy silverado with a 4.8 L engine. The original engine broke a connecting rod and had to be replaced withe the same size engine. The "new" engine is hard to start as it needs to turn ...

...ENGINE MY '84 CHEVY SILVERADO HAS IN IT. The 84 Silverado came with 305,350, and 454 engines. Look on the side of the block by the oil filter and get the casting number. Call your local Chev. dealer ...

Question about 2006 Silverado

1 Answer

84 chevy silverado fuel gauge reads full all the time Either the gauge is bad, the wiring is broken or shorted, or the sending unit in the gas tank is faulty.

...84 silverado when going about 65-70 wont go faster slow to around 60-65runs fine cuanged plugs wires cap and rotor 4500 miles orignal it actually chugs in a perfect rythem but no more speed after70 ...

Question about 1983 Silverado

1 Answer

1987 silverado 2WD 5.7 AT just died no inst panel lights no crank headlights work horn works dome lite works no power for windows or doors battery good new cables installed any suggestions???????? ...

Question about 1983 Silverado

1 Answer

How many qts of gear oil go in a 84 chevy c10 Gear oil in the rear differential? 2 quarts

Question about 1983 Silverado

1 Answer

I have put an 1989 350 engine in a 1983 chevy truck. Do I need a spacer between the block and motor mounts before I set the engine down in the truck? You didn't mention what was in the 83. If it ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...