Questions & Answers for: phono distortion

...thx.. Your turntable is a preamp. Your amplifier might be going bad. did you connect it into phono? dont connect it into the cd or dvd input because those wont work. maybe try replace the rca ...

...card. However, you can also try the PHONO settings, just to make sure. Normally, with a line in setting, there is bound to be distortion on a higher volume.. switching to the phono mode is ...

distortion through phono inputs I have a Denon DRA-335R and am getting very loud distortion through the phono inputs. Is there a way to clean/fix them? It is not happening through the other inputs and

...distortion. please advise. Are you using the phono input on the Sony? If so, you're getting too much gain, you've already got a phono pre amp in the Behringer. Try using the tape or C.D. input. That ...

...Distortion (60 Hz: 7 KHz = 4:1)...0.03% at rated power into 8 ohms Power Bandwidth...10 Hz to 100 kHz @ 0.2% THD 8 ohms Frequency Response...10 Hz to 70 kHz, +0dB, -3dB Input Sensitivity/Impedance ...

...headphones (?) themselves that are distorting. Wild guess... if you're plugging the output into "PHONO" on something it WILL distort above a very low level. "PHONO" is the only input in audio that ...

...PHONO but get static and distortion through speakers. Manual says to connect to AUX not PHONO but cannot see AUX on receiver. Any hints? You need to hook it up to another analog input other than the ...

phono inputs not working What's not working about them? The only thing that should be hooked up to a phono input is a non-amplified phonograph. Phono inputs usually have a preamp attached to them that

phono input without getting distortion. If you need to use the CD inputs for something else, I would buy an input selector from Amazon that will let you plug multiple components into one set of inputs

speakers distort when connecting to a laptop. is connecting via phono the correct way? No, the phono (phonograph) input is only for record players. Use any other input.