Questions & Answers for: phone receiver cord stay

phone doesn't ring at station When we receive a phone call, it rings on another phone, but not the one at my desk. I am told the 19th button (next to last on the bottom row) is for the ringer and ...

phone is fighting the weight of the receiver versus gravity. There is not much tolerance in these switches as you will notice if you gently put your finger on the receiver at the top of a wall hanging

...phone as holding down the receiver I did something to make my message light stay on, how can I get it to go off there are no old or new message. You probably didn't, but dialing 700 plus your ...

2yrs with no problem. I've checked the incoming dailtone, used buttset called in and out, used cell phone called in and fax ring and picks up, checked wiring, fax machine line cords, settings, changed

...receiver turns off when you set the volume to maximum, disconnect the power cord, and contact your Onkyo dealer." That last sentence is misleading. I don't think they actually want you to play an ...

...phone cord from the phone or wall jack. The phone system should come back on just fine at this time. If it does not come on than check to make sure your modem or MTA did not go offline indicating ...

receiver There should be a little clip to retain the cord in the handset. If this clip is gone, the cord needs replacing. This clip is a plastic protrusion on the clear (most of the time) connector to

...phone jack one an receive the ever-going current that stays on even if our power is turned off. However to remain brief, to charge a laptop battery from ...

receiver off the hook beeps for 30 seconds, and then all goes silent again (and stays that way for over 25 minutes, probably more). We never get a prompt to skip, or delete. Pressing *3 never works on

...should, but you can contact our tech support department For Baby/Home/Pet Monitors, Cordless/Corded Phones, Digital Photo Frames to this phone #: 1-888-331-3383 from Mon-Fri 7:00 am-7:00pm CST or ...