Questions & Answers for: phone jack wiring

Question about Lands Phones

4 Answers

...jack for a phone), then right back up the wall to the next (second) closest jack for a phone. Then, back up the wall and to the next and to the next and so on. This is called series wiring. There are ...

Ad

Question about Dterm DTP 16D-1 Corded Phone

1 Answer

Reconnect phone jack wire i have a nec phone system the blue wire from the jack came loose how do i reconnect? Put the blue wire back on the red wire from the jack.

Ad

Question about Dterm DTP 16D-1 Corded Phone

1 Answer

jack but phone still doesn't work. Phone works fine at other jacks in the house. Look at the wiring on the jacks that are working, notice the color of the wires on the screw terminals and try to match

Question about 25423RE1 Phone

1 Answer

...jack requirements are for the phone system I have but I cannot locate this information anywhere. Can you please let me know what the jack requirements are for the RCA model # 25423RE1-A Thank you You ...

Question about 25423RE1 Phone

1 Answer

jack and the phone, you'll need to take a closer look at the jack. A wire might have come loose in the faceplate connections or keystone jack. If you have a keystone jack, reseating the wires requires

...jack and the phone line coming from that jack. So I have phone/fax and DSL in my office, but no phone throughout the rest of the house. How do I correct this problem? In the alarm system there was a ...

jack with the simple phone that worked at the NID. None worked. What to check next? Any special tester available that tests a line better than a working phone? You can use an ohm meter or a continuity

...jack and the phone. Then try the old phone and see if you have a dial tone. If you have a dial tone with the old phone but not the cordless, then the Uniden needs service. These phones are not ...

Question about Cordless Phone

2 Answers

...phone jack. Is this a wired or wireless phone? For a wired phone, you could have a bad wire to the jack, a bad phone jack, bad wiring in the house, or bad wiring to the house. For a wireless handset, ...

...phone jack, if one is available. If there is a dial tone at another jack and a new cord didn't help at the first jack, then you have a wiring fault at the first jack. This could be in the jack itself ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

Cindy Wells

Level 3 Expert

6688 Answers

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Lands Phones Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...