Questions & Answers for: philips projection tv stk 392

Ad

Question about 60P8342 60" Rear Projection Television

1 Answer

...philips 60 inch TV, the process is the same, you need to open the back of tv then start numbering all the cables it was for me about 22 cables & then remove the chassis out, then you will see two ...

Ad

Question about 43UWX10B 43" Rear Projection Television

1 Answer

Philips 43pp9202 I got the same problem with my rear projection and i replaced the Ics STK 392-150 and the resistors over-heat ( at the beginning they were for the blue color proyector). when i ...

Ad

Question about 55PP9352 55" Projection Television

1 Answer

...tv I have a philips 55pp935217 and the picture looks double and blurry. I believe its called ghosting. convergence i.c.s change both of them even if only one color is out. if one is bad the other is ...

Question about Magnavox 55P9271 55" Rear Projection Television

1 Answer

...on.Call a good TV Tech and tell him you want the IC's upgraded to STK 392-150 instead of the original STK 392-120 and check all resistors in the circuit for proper value. They could be burned or

Question about 43PP9202 43" Rear Projection Television

1 Answer

Philips 43pp92 blue will not converge You have a $ decision---this model uses two STK-392-120 convergence IC's--if it will not adjust one is bad. Both need to be replaced--you can buy a pair on Ebay ...

Question about Magnavox 51MP392H Rear Projection Television

1 Answer

Philips Magnavox 51MP392H Rear Projection... The 55pp9352 model number uses 2 of the STK-392-120 convergence chips--if it will not adjust in some direction--both chips and any of the 6.8 ohm resistors

Question about 51PP9303H Rear Projection Television

1 Answer

Philips rear projection television set (51PP9303H) using answers here regarding bad convergence ICs. We are going to purchase new ICs and resistors, but need to know if there's an easy way to take the

Question about 60PP9352 60" Rear Projection Television

2 Answers

...tv If colors are skewed or look 3 d the convergence chips need to be replaced. This model should use two of the STK-392-120 BUT A FEW VERSIONS USE STK-392-110. THE CHIPS ARE BLACK--2 1/2 INCH WIDE ...

Question about 60PP9202 60" Rear Projection HDTV-Ready Television

2 Answers

...projection TV. What are the stock numbers for the chips? Are the STK392-110? With the back off look from the back to the far left side: two metal heat sinks side by side with fins---chips are bolted ...

Question about 60PP9202 60" Rear Projection HDTV-Ready Television

1 Answer

...TV it has a line in it. And it show a red line around the peoples heads and face. You have what is commonly called a convergence problem. It takes two chips (two identical recommended) and the part ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76125 Answers

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6009 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...