Questions & Answers for: pellet stove two wire thermostat

Question about Auburn Pellet Stove Heater

1 Answer

...pellet stove purchased a used Earth stove mp240 pellet stove and the auger does not move. we are looking for a manual or information on this stove it is an older stove we just don't know how old. ...

Ad

Question about Auburn Pellet Stove Heater

2 Answers

...stove and find the wiring. You will see the thermostat on the back side of the combustion chamber. Look very closely and reset it. good luck! if u can hear auger motor coming on every few seconds but ...

Ad

Question about Auburn Pellet Stove Heater

2 Answers

...pellet stove will not start. Press the start button, igniter button lights up but nothing happens. Is the auger light coming on to and dropping pellets into the burn pot? If the auger light is not ...

Question about Programmable Thermostat Heater

1 Answer

...pellet stove. Seems to be short cycling, the stove no sooner gets going then it shuts down. Could this be because of the heat cycle per hours? why's that there anyway? should stay and run untill no ...

Question about Electronic Programmable Heat/Cool Thermostat - CT3300A100 Heater

2 Answers

...pellet stove store to turn on and off the stove. I have two wires going to the stove frome the non-programmable that came with the stove. Does anyone know what two wires go to the stove and what ...

Question about Focus 6300B 5-2 Days Programmable Thermostat Heater

2 Answers

...pellet stove with only two wires.. How do I know where to connect them too? Hey Brad432, this is what i did with the same RTH2310B thermostat and my harmon stove. You must have the heat sensor that ...

Question about Programmable Thermostat Heater

1 Answer

...pellet stove and a thermostat can be hooked up to it. there are only a place for two wires. but i don`t know where to wire them on the thermostat rth2310b You will use thermostat wire and use the red ...

Question about TSR2 Battery Powered Wireless Wall Thermostat with LCD Screen Includes Receiver and Wall Plate TSR2

1 Answer

...pellet stove and ahve it wired to a thermostat but i want a wireless thermostat i think the skytech tsr2 will work would you know? The TSR2 will work if you have at least 750 millivolts at your ...

Question about TSR2 Battery Powered Wireless Wall Thermostat with LCD Screen Includes Receiver and Wall Plate TSR2

1 Answer

...pellet stove installation. two wires from stove. rth111 series non-programmable thermostat. wiring block in thermostat has B , O , G , Y , W , NOT USED , R , RC. what terminals do I hook up the wires ...

Question about TSR2 Battery Powered Wireless Wall Thermostat with LCD Screen Includes Receiver and Wall Plate TSR2

1 Answer

Wiring New thermostat Honeywell RTH2300/RTH221 for a two wire pellet stove Red and white

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Pool & Spa Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

David Spradling
David Spradling

Level 3 Expert

13522 Answers

Are you a Pool & Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...