Questions & Answers for: pcv valve isuzu rodeo 1999

PCV valve? IAC valve? Sparkplug wire? Throttle body? Vacuum hose? I had a diagnostic ran about half a year ago and said a misfire in cylinder 6 was occuring; the check engine light would come off and ...

Ad

...Isuzu Rodeo that will only fire on 3 cylinders. THe cylinders are all on 1 side and seemed to point at the Powertrain control module as the problem. We changed out the PCM, EGR valve, checked the ...

Ad

...PCV VALVE....? WHEN COLD STARTS it SHUTS OFF A FEW TIMES THEN WARMED UP IT IDLES FINE. NO DIFFERENCE AFTER REPLACING ALL ABOVE PARTS...IT STILL HAS NO POWER WHEN DRIVING? DONT WANT TO GO TO THE ...

isuzu rodeo? Where Is The Camshaft Position Sensor Located  On A 1999 Isuzu Rodeo? For the four cylinder it is located in the front part of the engine. you have to remove the spark plug cover cap

...the pcv valve located on a 2002 Isuzu Rodeo-V 6? Can't find it anywhere and it is not in my manual. Bought the part but can't find where it goes the valve should be located in one of the valve ...

...pcv valve hose off and the idle goes way up. Then when I put the hose back on it, it killed it right away. Does the pcv valve just need to be replaced or could it be an idle problem? Get your trouble ...

...PCV valve in a 1999 Isuzu Rodeo V-6 ? Does it have one? yes, it is stuck into one of the valve covers with a hose attached. Pull it straight out of the valve cover and check to see if the valve will ...

...pcv valve? still runs good Try replacing the PCV valve because if it's stuck closed it will build up internal pressure and cause oil to blow by the rings. It is an inexpensive way to start diagnosing ...

...Pcv valve and grommet 3.2L v6 is the engine type. Not sure which Pcv valve and grommet was in it after some guy did tune up on it. Right now it has plastic pcv and the grommet need replacement (has ...

Question about 1999 Rodeo LS

1 Answer

2.2l. Where is PCV valve located? are you going to ask for location of all 3000 parts on car?. 3 down 2997 to go.? see id 7 on UR last post that is the PCV port. and below is other PCV path

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...